One-Step Mycoplasma Pheumoniae (MP) IgM Test

• Instructions for use
• Feces collection tube

Immunochromatographic assay

The One-Step Mycoplasma Pheumoniae IgM Test uses serum or plasma samples as an auxiliary diagnostic reagent to qualitatively detect MP-IgM antibodies and MP infections in clinics.

Test Procedure:

1. Bring the pouched test device to room temperature (15-30℃) before testing. Do not open the pouch until ready to perform the assay.
2. Remove the test device from the sealed pouch. Lay it on a flat, clean, and dry surface.
3. Use the pipette to draw and slowly add one (1) drop (10 μl) of serum/plasma to the sample well.
4. Hold the buffer bottle vertically and add one (1) drop (40 μl) to the sample well. If using a pipette, change to new one to avoid cross-contamination. Draw and transfer two (2) drops of buffer to the sample well.
5. Wait for colored lines to appear. Read results between 15-20 minutes. The observation is invalid after 20 minutes.

• Positive: Two colored lines appear in the result window, one in the test region and another one in the control region. The color intensity of the test line may be weaker or stronger than that of the control line.
• Negative: Only the control line appears in the result window.
• Invalid: If no line appears in the control region, the test result is invalid regardless of the presence or absence of the test line. (NOTE: Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for the control line failure. Review the procedure and repeat the test with a new device. If the problem persists, contact your local distributor.)